Aastra 9143i Series Administrator's Manual page 150

IP Phone Administrator Guide
Administrator Level Options
Parameter In
IP Phone UI
N/A Outbound Proxy
Server
(Global and
Per-Line)
N/A Outbound Proxy Port
(Global and
Per-Line)
Registrar Server Registrar Server
(Global and
Per-Line)
Registrar Port Registrar Port
(Global and
Per-Line)
3-58
Parameter in
Aastra Web UI Configuration Files
sip outbound proxy
server
(global)
sip lineN outbound proxy
server
(per-line)
sip outbound proxy port
(global)
sip lineN outbound proxy
port
(per-line)
sip registrar ip
(global)
sip lineN registrar ip
(per-line)
sip registrar port
(global)
sip lineN registrar port
(per-line)
Parameters in
Address of the outbound proxy
server. All SIP messages originating
from the phone are sent to this
server. For example, if you have a
Session Border Controller in your
network, then you would normally
set its address here. Default is
0.0.0.0.
For more information, see Chapter
4, "Basic SIP Settings"
page
The proxy port on the proxy server
to which the IP phone sends all SIP
messages. Default is 0.
For more information, see Chapter
4, "Basic SIP Settings"
page
IP address of the SIP registrar. Up
to 64 alphanumeric characters.
Enables or disables the phone to be
registered with the Registrar. When
Register is disabled globally, the
phone is still active and you can dial
using username and IP address of
the phone. A message "No Service"
displays on the idle screen and the
LED is steady ON. If Register is
disabled for a single line, no
messages display and LEDs are
OFF.
For more information, see Chapter
4, "Basic SIP Settings"
page
SIP registrar's port number. Default
is 0.
For more information, see Chapter
4, "Basic SIP Settings"
page
41-001160-03 Rev 00, Release 2.5
Description
on
4-71.
on
4-71.
on
4-71.
on
4-71.