Aastra 9143i Series Administrator's Manual page 267

Aastra Web UI
Step Action
3 In the "Screen Name 2" field, enter the text you want to display on the phone under the "Screen
Name" on the idle screen.
Notes:
1. If other status messages display on the phone, such as "Network Disconnected", the Screen
Name 2 value does not display.
2. Symbol characters are allowed (such as "#").
3. If the text is longer than the display width, than the display truncates the text to fit the display.
Figure 1
8 and 11-Line
LCD Displays
Figure 2
3-Line
LCD Displays
4 In the "Phone Number" field, enter the phone number of the IP phone.
5 In the "Caller ID" field, enter the phone number of the IP phone.
6 In the "Authentication Name" field, enter the name used in the username field of the Authorization
header of the SIP REGISTER request.
7 In the "Password" field, enter the password used to register the IP phone with the SIP proxy.
Note: The IP phones accept numeric passwords only.
8 In the "BLA Number" field, enter the Bridge Line Appearance (BLA) number to be shared across all
IP phones.
41-001160-03 Rev 00, Release 2.5
Configuring Network and Session Initiation Protocol (SIP) Features
Services Icom
Dir
Callers
John Smith
L1
Lab Phone
Sat Jan 1 12:18am
1
John Burns
Lab Phone
Sat Jun 8 2:55pm
Global SIP Settings
Screen Name
Screen Name 2
Screen Name
Screen Name 2
4-83