Aastra 9143i Series Administrator's Manual page 248

IP Phone Administrator Guide
Network Settings
Aastra Web UI
Step Action
To set VLAN ID and priority for the PC Port (Port 1):
6 Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 1.
Note: If you set the PC Port VLAN ID (Port 1) to 4095, all untagged packets are sent to this PC Port.
The following is an example of configuring the phone on a VLAN where all untagged packets are sent
to the passthrough port.
Example
You enable tagging as normal, enter a value for the LAN Port VLAN ID, and then set the PC
Port VLAN ID to 4095. The following example sets the phone to be on VLAN 3 but the PC Port
VLAN ID is configured as untagged..
7 Select a VLAN priority value from 0 to 7 for the PC Port in the Priority field. Default is 0.
8 Click
4-64
to save your settings.
41-001160-03 Rev 00, Release 2.5