Aastra 9143i Series Administrator's Manual page 99

The following are options that an Administrator can configure in the Aastra Web
UI (and are not available for the User to configure):
• Operation->Reset
— Restore to Factory Defaults
— Remove Local Configuration Settings
• Basic Settings->Preferences->General
— Local Dial Plan
— Send Dial Plan Terminator
— Digit Timeout (seconds)
• Basic Settings->Preferences->Outgoing Intercom Settings (User can
configure this via the Aastra Web UI if enabled by an Administrator)
• Basic Settings->Preferences->Key Mapping
• Basic Settings->Preferences->Priority Alerting Settings
• Basic Settings->Preferences->Directed Call Pickup Settings
• Basic Settings->Preferences->Auto Call Distribution Settings
• Basic Settings->Preferences->Language Settings
— Language 1 (entering language pack filename)
— Language 2 (entering language pack filename)
— Language 3 (entering language pack filename)
— Language 4 (entering language pack filename)
• Advanced Settings
— Network
— Global SIP
— Line 1 through 9 Settings
— Action URI
— Configuration Server
— Firmware Update
— TLS Support
— 802.1x Support
— Troubleshooting
41-001160-03 Rev 00, Release 2.5
Administrator Options
Administrator Level Options
3-7