Upnp Settings - Aastra 9143i Series Administrator's Manual

UPnP Settings

Parameter –
upnp manager
UPnP
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
upnp gateway
Description
Format
Default Value
Range
Example
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
IP phone UI
Aastra Web UI
Configuration Files
Enables or disables Universal Plug and Play (UpnP) on the IP phone. If
you set this parameter to "0", you can manually configure NAT on the IP
phone and the UPnP manager will not start.
Boolean
0 (false)
0 (false)
1 (true)
upnp manager: 1
Configuration Files
IP address or fully qualified Domain Name of the Internet gateway or
router. This parameter stores the IP address of the gateway or router in
the event that only non-default UPnP gateways get discovered on the
network. The UPnP port mappings are saved to this IP address so even if
the phone reboots, it will still have the correct port mappings.
IP address or fully qualified Domain Name
0.0.0.0
Not Applicable
upnp gateway: 120.400.003.2
Options->Administrator Menu->
Network Settings->UPnP
Advanced Settings->Network->
Advanced Network Settings
aastra.cfg, <mac>.cfg
aastra.cfg, <mac>.cfg
A-41