Aastra 9143i Series Administrator's Manual page 719

Configuring the 802.1x Protocol Using the Aastra Web UI
Use the following procedure to configure the 802.1x Protocol on your phone
using the Aastra Web UI.
Aastra Web UI
1 Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2 In the "EAP Type" field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3 In the "Identify" field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
4 In the "MD5 Password" field, enter a password used for the MD5 authentication of the phone.
For example, password1.
5 Click
41-001160-03 Rev 00, Release 2.5
to save your changes.
Configuring Advanced Operational Features
Advanced Operational Features
6-39