Local Sip Udp/Tcp Port Setting; Local Sip Tls Port - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Local SIP UDP/TCP Port Setting

Parameter –
sip local port
Description
Format
Default Value
Range
Example

Local SIP TLS Port

Parameter –
sip local tls port
Description
Format
Default Value
Range
Example
A-34
Aastra Web UI: Advanced Settings->Global SIP->
Advanced SIP Settings
Configuration Files aastra.cfg, <mac>.cfg
Specifies the local source port (UDP/TCP) from which the phone sends
SIP messages.
Numeric
5060
Greater than 1024 and less than 65535
Notes:
1. It is recommended that you avoid the conflict RTP port range in case
of a UDP transport.
2. By default, the IP phones use symmetric UDP signaling for outgoing
UDP SIP messages. When symmetric UDP is enabled, the IP phone
generates and listens for UDP messages using port 5060.If symmetric
UDP signaling is disabled, the phone sends from random ports but it
listens on the configured SIP local port.
sip local port: 5060
Aastra Web UI: Advanced Settings->Global SIP->
Advanced SIP Settings
Configuration Files aastra.cfg, <mac>.cfg
Specifies the local source port (SIPS/TLS) from which the phone sends
SIP messages.
Numeric
5061
Greater than 1024 and less than 65535
Note: It is recommended that you avoid the conflict with any TCP ports
being used. For example: WebUI HTTP server on 80/tcp and HTTPS
on 443/tcp.
sip local tls port: 5061
41-001160-03 Rev 00, Release 2.5