Using The Restart Feature - Aastra 9143i Series Administrator's Manual

Aastra Web UI
Step Action
6 In the "Port" field, enter the port number of the protocol server. For example, 80 (for HTTP) or 443
(for HTTPS).
Note: This field is not applicable to the TFTP and FTP protocols.
7 (FTP only) In the "Username " field, enter the username that is used for authentication when the FTP
server is accessed.
8 (FTP only) In the "Password " field, enter the password that is used for authentication when the FTP
server is accessed.
9 Click
This starts the upgrade process. If the upgrade is successful the following message displays on the
screen: "Firmware Upgrade Successful".

Using the Restart Feature

Restarting the phone forces the phone to check for both firmware and
configuration files stored on the configuration server.
Restarting the Phone Using the IP Phone UI
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
41-001160-03 Rev 00, Release 2.5
.
Warning: Do not reset or turn off the phone until the download is
complete.
Upgrading the Firmware
Upgrading the Firmware
8-5