Sip Local Dial Plan Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

SIP Local Dial Plan Settings

Parameter –
sip dial plan
Local Dial Plan
(in Web UI)
Description
Format
Default Value
A-72
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Reference: A dial plan describes the number and pattern of digits that a
user dials to reach a particular telephone number. The SIP local dial plan
is as follows:
Reference: SymbolDescription
Reference: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9Digit symbol
Reference: XMatch any digit symbol (wildcard)
Reference: *, #, .Other keypad symbol; # can terminate
a dial string
Reference: |Expression inclusive OR
Reference: +0 or more of the preceding digit symbol
or [] expression
Reference: []Symbol inclusive OR
Reference: -Used only with [], represent a range of
acceptable symbols; For example, [2-8]
Reference: "," (open/close quotes)In the configuration files, enter the sip
dial
plan value using quotes.
Reference: .;.Used when a secondary dial tone is
required on the phone. (For example,
"9;xxxxxx", when a user has to dial "9" to get
and outside line and needs a secondary dial
tone presented.
Reference:
Reference: You can configure prefix dialing by adding a prepend digit to
the dial string. For example, if you add a prepend map of
"[2-9]XXXXXXXXX,91", the IP phone adds the digits "91" to any 10-digit
number beginning with any digit from 2 to 9 that is dialed out. Other
examples of prepend mappings are:
Reference:
Reference: 1X+#,9 (Prepends 9 to any digit string beginning with "1" and
terminating with "#".)
Reference: 6XXX,579 (Prepends "579" to any 4-digit string starting with
"6".)
Reference: [4-6]XXXXXX,78 (Prepends "78" to any 7-digit string starting
with "4", "5", or "6".
Reference: Alphanumeric characters
Reference: X+#|XX+*
41-001160-03 Rev 00, Release 2.5