Status Scroll Delay - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational Features

Status Scroll Delay

The IP phones have a feature that allows you to specify the time delay, in seconds,
between the scrolling of each status message (including XML status messages) on
the phone. The default time is 5 seconds for each message to display before
scrolling to the next message. You can configure this option via the configuration
files or the Aastra Web UI.
Reference
For more information about configuring the status scroll delay for XML status
messages, see
Configuring Status Scroll Delay
Use the following procedures to configure Status Scroll Delay.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on page A-153.
5-74
"XML Customized Services" on page 5-316.
"XML Settings"
41-001160-03 Rev 00, Release 2.5