Aastra 9143i Series Administrator's Manual page 87

Advanced Settings (Applicable to Administrator Only)
The Advanced Settings section provides the following options:
Heading
Network
Global SIP
Lines 1 through 9
Action URI
Configuration Server
Firmware Update
TLS Support
41-001160-03 Rev 00, Release 2.5
Description
Allows you to set Basic Network Settings, Advanced
Network Settings, HTTPS Settings, Type of Service DSCP,
and VLAN settings.
Allows you to set global Basic SIP Authentication Settings,
Basic SIP Network Settings, Advanced SIP Settings,
Real-time Transport Protocol (RTP) settings, Codec
Preference List Settings, and Autodial Settings that apply to
all lines on the IP phone.
Allows you to set per-line Basic SIP Authentication Settings,
Basic SIP Network Settings, Advanced SIP Settings,
Real-time Transport Protocol (RTP) settings, and Autodial
Settings that apply to specific lines on the IP phone.
Allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain events
occur. An Administrator can also specify a URI to be called,
enable polling for the URI, and specify the interval between
polls.
(Applicable to Administrator Only)
Allows you to set the protocol to use on the configuration
server (TFTP (default), FTP, HTTP, or HTTPS), configure
automatic firmware and configuration file updates, enable/
disable auto-resync, and assign an XML push server list.
(Applicable to Administrator Only)
Allows you to manually perform a firmware update on the IP
phone from the configuration server using any of the IP
Phones supported protocols.
(Applicable to Administrator Only)
Allows you to specify SIP Root and Intermediate Certificate
files, local certificate files, private key filename, and/or
trusted certificate filename to use when the phone uses the
TLS transport protocol to setup a call.
(Applicable to Administrator Only)
Configuration Interface Methods
Configuration Methods
2-15