Aastra 9143i Series Administrator's Manual page 515

Aastra Web UI
3 Click
The change takes effect immediately without a reboot.
4 Click on Basic Settings->Account Configuration.
5 For each account, enable DND by placing a check mark in the box. Disable DND by unchecking the
box.
Notes:
1. If you selected "Account" or "Custom" mode in step 2, you can enable/disable each account or
all accounts as applicable.
If you selected "Phone" mode, the first account allows you to change the DND status for all accounts.
2. Number and name of accounts that display to this screen are dependant on the number and
name of accounts configured on the phone. In the screen in step 4, Screenname1 is configured on
Line 1, Screenname2 is configured on Line 2, and Screenname3 is configured on Line 3. The name
for the account is dependant on the name specified for the "Screen Name" parameter at the path
Advanced Settings->LineN. If you do not specify a value for the "Screen Name" parameter, the
account name is based on the "Phone Number" parameter at the path Advanced Settings->LineN.
If neither the "Screen Name" nor the "Phone Number" parameters are specified, the account name
shows "1", "2", "3", etc. only.
41-001160-03 Rev 00, Release 2.5
to save your changes.
Configuring Operational Features
Operational Features
5-211