Mapping Key Settings - Aastra 9143i Series Administrator's Manual

Mapping Key Settings

This section provides the hard key settings you can use to enable and disable the
Redial, Conf, and Xfer keys on the IP phone.
Parameter –
redial disabled
Description
Format
Default Value
Range
Example
Parameter –
conference disabled
Description
Format
Default Value
Range
Example
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
Configuration Files
Enables or disables the Redial key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Redial key is ignored, and the dialed number is not
saved to the "Redial List".
Boolean
0 (false)
0 (false), 1 (true)
redial disabled: 1
Configuration Files
Enables or disables the Conf key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Conf key is ignored.
Boolean
0 (false)
0 (false), 1 (true)
conference disabled: 1
aastra.cfg, <mac>.cfg
aastra.cfg, <mac>.cfg
A-213