Aastra 9143i Series Administrator's Manual page 189

• FTP Path
• HTTP Server
• HTTP Path
• HTTP Port
• HTTPS Server
• HTTPS Path
• HTTPS Port
The network administrator chooses which of these parameters (if any) are
supplied to the IP phone by the DHCP server. The administrator must configure
the phone manually to provide any required network parameters not supplied by
the DHCP server.
Enabling/Disabling DHCP Using the Configuration Files
Use the following procedure to enable/disable DHCP on the phone using the
configuration files.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings" on page A-8.
41-001160-03 Rev 00, Release 2.5
Configuring Network and Session Initiation Protocol (SIP) Features
Network Settings
"Network
4-5