Aastra 9143i Series Administrator's Manual page 748

IP Phone Administrator Guide
Upgrading the Firmware
Enabling Auto-Resync Using the Configuration Files
Use the following procedure to configure automatic updates of the IP phone
firmware, configuration files, or both.
Configuration Files
For specific parameters you can set in the configuration files for automatic update, see Appendix A, the
section, "Configuration Server Settings"
.
8-8
on page A-18.
Notes:
1. If a user is accessing the Aastra Web UI, they are not informed of an
auto-reboot.
2. Any changes made using the Aastra Web UI or the IP phone UI are
not overwritten by an auto-resync update. Auto-resync affects the
configuration files only. However, the settings in the Aastra Web UI take
precedence over the IP phone UI and the configuration files.
3. If the IP phone is in use (not idle) at the time of the resync check, the
reboot occurs when the phone becomes idle.
4. The resync time is based on the local time of the IP phone.
5. The automatic update feature works with both encrypted and plain
text configuration files.
41-001160-03 Rev 00, Release 2.5