Custom Configuration
File Parameter
Absolute Time (not applicable to Eastern Standard Time (EST))
dst start month
dst end month
dst [start |end] week
dst start day
dst end day
dst start hour
dst end hour
Relative Time
dst start month
dst end month
dst start week
41-001160-03 Rev 00, Release 2.5
Description
The month that DST starts. Valid values
are 1 to 12 (January to December).
The month that DST ends. Valid values
are 1 to 12 (January to December).
Not applicable to absolute time.
The day of the month that DST starts.
Valid values are 1 to 31.
The day of the month that DST ends.
Valid values are 1 to 31.
The hour that DST starts. Valid values
are an integer from 0 (midnight) to 23.
The hour that DST ends. Valid values
are an integer from 0 (midnight) to 23.
The month that DST starts. Valid values
are 1 to 12 (January to December).
The month that DST ends. Valid values
are 1 to 12 (January to December).
The week in the specified month in
which DST starts. Valid value is a
positive or negative integer from 1 to 5.
1 = first full week of month
-1 = last occurance "dst start day" in the
month
2 = second full week of month
-2 =second last occurance "dst start
day" in the month
.
.
.
5 = fifth full week of month
-5 = fifth last occurance "dst start day" in
the month
Configuring Operational Features
Operational Features
Example
dst start month: 3
dst end month: 4
N/A
dst start day: 15
dst end day: 31
dst start hour: 5
dst end hour: 23
dst start month: 4
dst end month: 5
dst start week: 2
5-21