Procedure To Encrypt Configuration Files - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Encrypted Files on the IP Phone

Procedure to Encrypt Configuration Files

To encrypt the IP phone configuration files:
Open a command line window application (i.e., DOS window).
1.
At the prompt, enter anacrypt.exe and press <Return>.
2.
C:\> anacrypt.exe -h
Provides encryption of the configuration files used for the family of Aastra IP
phones, using 56bit triple-DES and site-specific keys.
Copyright (c) 2008, Aastra Technologies, Ltd.
Copyright (c) 1999, Philip J. Erdelsky
Usage:
anacrypt {infile.cfg|-d <dir>} [-p password] [-m] [-i] [-v] [-h]
Anacrypt Switch
{infile.cfg | -d <dir>}
[-p password]
-m
-i
-v
-h
Note: Incorrect password produces garbage. For site-specific keyfile
security.cfg the plaintext must match password.
7-4
Description
Specifies that all .cfg files in <dir> should be encrypted
Specifies password used to generate keys
Generate MAC.tuz files that are phone specific.
only usable for phones with firmware version 2.2.0 and above.
Generate security.tuz file
Specifies the version of encryption that the anacrypt tool uses. Use version 1 encryption
(i.e., -v1) to generate firmware that is readable by all model phones.
switch, the anacrypt tool generates files that are only readable by phones with
firmware 2.2.0 and above.
Display program help text
This switch generates files that are
Without the -v1
41-001160-03 Rev 00, Release 2.5