Aastra 9143i Series Administrator's Manual page 165

Action URI
Poll
Poll Interval
You can set these parameters using the configuration files or the Aastra Web UI.
Reference
For more information about setting the Action URIs for XML applications, see
"XML Action URIs"
Action URI Disconnected
The phones allow an Administrator to specify a URI to allow a disconnect event
to occur when the phone transitions from any active state (outgoing, incoming,
connected, or calling) to an idle state.
Reference
For more information about configuring the Action URI Disconnected parameter,
see "Action URI Disconnected"
XML SIP Notify Events and Action URIs
In order for an XML push to bypass the NAT/firewall, the phone supports a
proprietary SIP NOTIFY event (aastra-xml) with or without XML content.
If XML content is provided in the SIP NOTIFY, it is processed directly by the
phone as it is done for an XML PUSH.
Reference
For more information about enabling the XML SIP Notify on the IP Phones, see
Chapter 5, the section,
41-001160-03 Rev 00, Release 2.5
Description
Specifies the URI to be called every "action uri poll interval"
seconds.
Specifies the interval, in seconds, between calls from the
phone to the "action uri poll".
on page 5-330.
on page 5-341.
"XML SIP Notify Events"
Administrator Options
Administrator Level Options
on page 5-344.
3-73