Rtcp Summary Reports - Aastra 9143i Series Administrator's Manual

Parameter –
QoS eth port 1 priority
Priority
(for PC Port in
Web UI)
Description
Format
Default Value
Range
Example

RTCP Summary Reports

Global Parameters
Parameter –
sip rtcp summary reports
Description
Format
Default Value
Range
Example
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
IP phone UI
Aastra Web UI
Configuration Files
Specifies the priority value used for passing VLAN packets through to a
PC via Port 1.
Integer
0
0 to 7
QoS eth port 1 priority: 3
Configuration Files
Specifies whether or not to send of RTCP summary reports.
Note: You must restart the phone after setting a value for this parameter.
Boolean
0
0 (disabled - OFF)
1 (enabled - ON)
sip rtcp summary reports: 1
Options->Administrator Menu->
Network Settings->VLAN->Passthrough
->Priority
Advanced Settings->Network->VLAN->Port 1
aastra.cfg, <mac>.cfg
aastra.cfg, <mac>.cfg
A-47