Aastra 9143i Series Administrator's Manual page 243

.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Network->Type of Service,DSCP.
2 Select a Protocol field:
• "SIP"
or
• "RTP"
or
• "RTCP"
3 Enter a value from 0 to 63. Default values are as follows:
SIP = 26
RTP = 46
RTCP = 46
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
page 4-60 For more information, see the section
4 Click
41-001160-03 Rev 00, Release 2.5
Configuring Network and Session Initiation Protocol (SIP) Features
"Configuring VLAN (optional)"
to save your settings.
Network Settings
"DSCP Range/VLAN Priority"
on page 4-60.
on
4-59