Aastra 9143i Series Administrator's Manual page 403

The following table identifies the configuration parameters for LLDP and ELIN
and which method you can use to configure each parameter. This table also
indicates whether the parameters can be configured by an Administrator, a User,
or both.
Parameter
lldp
lldp interval
use lldp elin
LLDP Support
LLDP
LLDP Packet Interval
LLDP ELIN
Configuring LLDP-MED and ELIN
Use the following procedures to configure LLDP-MED and ELIN on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
ELIN Settings" on page A-150.
Use the following procedure to enable/disable LLDP-MED using the IP Phone
UI.
41-001160-03 Rev 00, Release 2.5
Method of Configuration
Configuration Files
Configuration Files
Configuration Files
IP Phone UI
Aastra Web UI
Aastra Web UI
Aastra Web UI
Note: You cannot configure the "LLDP Interval" or the "Use LLDP
ELIN" parameters via the IP Phone UI.
Configuring Operational Features
Operational Features
Who Can Configure
Administrator
Administrator
Administrator
Administrator
Administrator
Administrator
Administrator and User
"LLDP-MED and
5-99