Replacing Six-Position Scsi (Ses) Or Ssa Disk Drive Bays - IBM F80 Service Manual

Replacing Six-Position SCSI (SES) or SSA Disk Drive Bays

1. If you are installing a second disk drive bay, and an adapter to connect the disk
drive bay to the system, install the adapter first. Refer to "Replacing Adapter Cards"
on page 332.
2. Locate the new disk drive bay cage and connect the power cables to the top rear of
the backplane. Then connect the signal cables to the backplane.
SCSI (SES) Drive Bay Cables
1
2
3
362
Service Guide
5
4
2
I C Connector
SCSI Connector
Power Connector
2
1
4 Power Connector
5 SCSI Connector
3