IBM F80 Service Manual page 190

Table 7. Service Processor Error Codes (continued)
Error Code
406D 00A7
406D 00B0
406D 00B1
406D 00B7
406D 0100
406D 0101
406D 0102
406D 0103
406D 0104
406D 010D
406D 0111
406D 0112
406D 0113
406D 0114
406D 011D
406D 0121
406D 0122
406D 0123
172
Service Guide
Description
Attention handler detected hardware
problem
Attention handler detected bus
controller lock-unlock failure
Attention handler diagnostics
detected bus controller failure
Attention handler detected insufficient
hardware resources to continue IPL
Attention handler detected memory
riser card fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Attention handler detected memory
DIMM fault
Action/ Possible Failing FRU
Go to "MAP 1540: Minimum
Configuration" on page 57.
System board, Location: P1
System board, Location: P1
This error code appears after the
initial testing by the service processor
firmware on the processors and
memory completed successfully, but
a problem occurred when the
firmware tried to communicate
outside the processor and memory
complex. Suspect a problem with the
backplane, location: P1.
Memory riser card Location: P1-M2
Memory DIMM Location: P1-M2.15
Memory DIMM Location: P1-M2.1
Memory DIMM Location: P1-M2.16
Memory DIMM Location: P1-M2.2
Memory DIMM Location: P1-M2.1 x4
Memory DIMM Location: P1-M2.13
Memory DIMM Location: P1-M2.3
Memory DIMM Location: P1-M2.14
Memory DIMM Location: P1-M2.4
Memory DIMM Location: P1-M2.3 x4
Memory DIMM Location: P1-M2.11
Memory DIMM Location: P1-M2.5
Memory DIMM Location: P1-M2.12