Table of Contents
Advertisement
– Enable supplemental restart policy - The default setting is No. If set to Yes, the
– Call-Out before restart (enabled/disabled) - If a restart is necessary due to a
v Power-On System
Allows immediate power-on of the system. For other power-on methods, see
"Powering On the System" on page 9.
v Power-Off System
Allows the user to power-off the system.
v Enable/Disable Fast System Boot
Allows the user to select the speed of the system boot.
Attention:
and a shorter memory test being run.
264
Service Guide
service processor restarts the system when the system loses control as detected
by service processor surveillance, and either:
The Use OS-Defined restart policy is set to No.
OR
The Use OS-Defined restart policy is set to Yes, and the operating system
has no automatic restart policy.
Refer to "Service Processor Reboot/Restart Recovery" on page 282.
system fault, you can enable the service processor to call out and report the
event. This option can be valuable if the number of these events becomes
excessive, signalling a bigger problem.
Selecting the fast IPL results in several diagnostic tests being skipped
Advertisement
Table of Contents
