Covers; Removing The Covers - IBM F80 Service Manual

Rs/6000 enterprise server
Hide thumbs Also See for F80:
Table of Contents

Advertisement

Covers

Removing the Covers

To remove the covers, perform the following steps:
1. Some procedures can be performed while the system power is on. Refer to
"Hot-Pluggable Options" on page 316 to determine if the device you are installing is
hot-pluggable.
If the option you are installing is:
v A hot-pluggable device, proceed to the next step.
v Not a hot-pluggable device, then shut down the system as described in "Stopping
2. To remove the front cover, grasp the cover at the top and pull out the top far
enough to clear the front of the system.
3. Lift up the front cover to disengage the tabs on the bottom.
the System Unit" on page 316.
Chapter 9. Removal and Replacement Procedures
311

Advertisement

Table of Contents
loading

Table of Contents