IBM F80 Service Manual page 148

Table 6. Firmware Error Codes (continued)
Error Code
25A8 0xxx
25A8 0000
25A8 0001
25A8 0002
25A8 0011
25A8 0012
25A8 0021
25A8 0022
25A8 0100
25A8 0201
25A8 0202
25A8 0203
25A8 0210
130
Service Guide
Description
NVRAM problems
Initialization failed, device test failed
Init-NVRAM invoked, all of NVRAM
initialized
Init-NVRAM invoked, some data
partitions may have been preserved.
Data corruption detected, all of
NVRAM initialized
Data corruption detected, some data
partitions may have been preserved.
Data corruption detected during error
log entry. All of NVRAM initialized
Data corruption detected during error
log entry. Some data partitions may
have been preserved.
NVRAM data validation check failed.
Unable to expand target partition -
Ssving configuration variable.
Unable to expand target partition -
writing error log entry.
Unable to expand target partition -
writing VPD data.
Setenv/$Setenv parameter error -
name contains a null character.
Action/ Possible Failing FRU
Errors reported against NVRAM can
be caused by low battery voltage and
(more rarely) power outages that
occur during normal system usage.
With the exception of the 25A80000
error, these errors are warnings that
the NVRAM data content had to be
reestablished and do not require any
FRU replacement unless the error is
persistent. When one of these errors
occurs, any system customization (for
example, boot device list) information
has been lost; the system may need
to be reconfigured.
If the error is persistent, replace
system board. (See note 3 on page
41.) Location: P1
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Turn off, turn on system unit and
retry the operation before replacing
any system component.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.