Table of Contents
Advertisement
IP Parameters
Select the IP Parameters option from the Network Parameters menu to display a
screen similar to the following:
IP Parameters
1. Client IP Address
2. Server IP Address
3. Gateway IP Address
4. Subnet Mask
===>
To set an address using this menu, do the following:
1. Type the number of the selection (1, 2, 3, or 4).
2. Enter the address on the next screen.
Attention:
gateway IP address to [0.0.0.0].
300
Service Guide
[9.3.146.162]
[9.3.146.171]
[0.0.0.0]
[255.255.255.0]
If the client system and the server are on the same subnet, set the
.------.
|X=Exit|
`------'
Advertisement
Table of Contents
