Table of Contents
Advertisement
Replacement
Note: If your system has a one-way processor card installed, the memory may be
1. With one hand, touch any metal surface of the chassis to minimize static electrical
charges, and then pick up the memory DIMM.
2. Locate the memory DIMM connector on the card, and remove the dummy memory
DIMM from the connector by pushing the tabs out on the memory connector.
3. Insert the memory DIMM by firmly pressing the DIMM into the connector. Secure
the DIMM into position with the locking tabs on each end of the connector.
4. Install the memory riser card in the system unit. See "Installing a Memory Riser
Card or a One-Way Processor Card" on page 343 for more information.
348
Service Guide
installed on this card. Remove the processor card to upgrade the memory. See
"Removing a Memory Riser Card or One-Way Processor Card" on page 342.
1
2
Push Locking Tabs
Out to Release Memory
Module
Locking Tabs
1
Advertisement
Table of Contents
