Removing Processor and Memory Riser Card Cover
1. If you have not already done so, shut down the system as described in "Stopping
the System Unit" on page 316.
2. If you have not already done so, unplug the system unit power cable from the
electrical outlet.
3. If you have not already done so, remove the covers as described in "Removing the
Covers" on page 311.
4. Remove the knurled screw (1) that holds the processor and memory riser card
cover and open the cover. If the cover is opened far enough, you can remove it
from the frame.
Replacing Processor and Memory Riser Card Cover
To replace the processor and memory riser card cover, perform the removal steps in the
reverse order.
1
Chapter 9. Removal and Replacement Procedures
315