IBM F80 Service Manual page 212

Table 7. Service Processor Error Codes (continued)
Error Code
450A 25BE
450A 25BF
450A 25CB
450A 25EA
450A 25EB
450A 25F2
450A 263D
450A 281F
450A 282E
450A 283F
450A 288D
450A 2A00
450A 300A
450A 300B
450A 300C
450A 300D
194
Service Guide
Description
Memory system and self test
detected 4W 600 MHz processor
fault
Memory system and self test
detected 6W 668 MHz processor
fault
1W processor card fault
4W processor card fault
2W processor card fault
6W processor card fault
Memory system and self test
detected memory filler fault
Memory system and self test
detected SSA backplane fault
Memory system and self test
detected system board fault
Memory system and self test
detected SCSI backplane fault
Memory system and self test
detected memory riser fault
Memory system and self test
detected 6W 4M 500 MHz processor
fault
Memory system and self test
detected 32MB DIMM fault
Memory system and self test
detected 128MB DIMM fault
Memory system and self test
detected 256MB DIMM fault
Memory system and self test
detected 512MB (stacked) DIMM
fault
Action/ Possible Failing FRU
Processor card, Location: P1-C1
Processor card, Location: P1-C1
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Replace the processor card,
Location: P1-C1
Memory filler card, Location: P1-M1
or P1-M2
SSA 6-pack, Location: B1 or B2
1. System board, Location: P1
2. Processor card, Location: P1-C1
SCSI 6-pack, Location: B1 or B2
1. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See "Memory
Configuration/Deconfiguration
Menu" on page 268 for more
information.
2. Memory riser card, Location:
P1-M1 or P1-M2
Processor card, Location: P1-C1
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn