Macintosh Software - Xerox ii LINXSolid Inkjet 100 Service Manual

7-30 ii LINX™ Solid Inkjet 100 Printer Service Manual
®
Macintosh Software
Install
1. Insert the printer's CD-ROM.
2. Double-click on the installer and follow the online instructions.
Set Up the Driver
1. From the Apple menu, select Chooser.
2. Click the icon of the printer driver (LaserWriter 8) on the left
side of the window.
3. Click the Zone for your printer, if applicable.
4. From the list of printers on the right side of the window, select
your printer. If it is not in the list, check the hardware
connections and verify that you have selected the correct zone
in the Chooser on the left side of the window.
5. Click Setup/Create to select the correct PostScript Printer
Description (PPD) file.
6. After the automatic setup has completed, click Setup and click
Configure.
7. Select the options that are installed in your printer (for
example, memory configuration, Auxiliary Feeder, or internal
hard drive); this information can be found on the Startup page.
Setting up the driver allows you to select all printer options
when printing.
8. Click OK.
9. Close the Chooser.