Xerox ii LINXSolid Inkjet 100 Service Manual page 25

The printer is not permanently attached to the Auxiliary Feeder unit.
When moving the printer or auxiliary feeder unit, move each unit
separately to avoid damage or personal injury. The printer weighs
about 36 kg (79 lb.). Do not attempt to lift it without the assistance
WARNING
of another person.
Repacking the Auxiliary Feeder Unit
If you have an Auxiliary Feeder unit, repack for shipment using the
original packaging.
Remove the media tray from the Auxiliary Feeder unit and remove all
media from the tray. Slide the media tray into the Auxiliary Feeder
unit and place the assembly inside the plastic shipping bag. Place the
front and rear cushions on the Auxiliary Feeder unit. Place the entire
assembly into the cardboard box.
1239-01
General Information 1-25