Xerox ii LINXSolid Inkjet 100 Service Manual page 236

Removing the Maintenance Cam Roller and Electric
Clutch
6-46 ii LINX™ Solid Inkjet 100 Printer Service Manual
Upper stripper
finger assembly
Lower stripper
finger assembly
C-clip
Bushing
Figure 6-29. Removing Stripper Finger Assemblies
1. Remove the right cover.
2. Remove the left cover.
3. Disconnect the maintenance cam roller electric clutches wiring
harness from the left I/O board.
4. At the left side of the printer, remove the C-clip securing the
maintenance cam roller electric clutch. Remove the clutch.
Transfix
roller
cam
Bushing
Spring
Cam rider
Extruded
pin
Spring
Spring
unit
C-clip
Cutting
screw
840-4-27