Xerox ii LINXSolid Inkjet 100 Service Manual page 51

Inter-
mediate
Low
Clear
High
* 300 dpi pixels
Figure 1-19. Printhead Detail
The ink-jet array is bonded to a cast aluminum ink reservoir. The
reservoir supplies the molten ink to the ink-jet array. Heaters in the
reservoir and the ink-jet array maintain the ink at a temperature of
about 140 o C for printing. The level of the ink in the reservoir is kept
at a constant level.
Ink inlet
Manifolds
Piezoelectric crystals
22 pixels
22 pixels*
11 pixels*
22 pixels*
General Information 1-51
840-4-49