Page 1
Finishing Solutions Planning Guide Supported Printers: • Xerox DocuPrint 1xx • Xerox DocuTech 1xx HighLight Color (HLC) • Xerox DocuTech 61xx Lasermax Roll System DocuSheeter DP and DocuSheeter DT with optional Grain Rotator July 12, 2005 Rev. Draft 3...
Page 2
Webster, NY 14580 Copyright 2004 Xerox Corporation. All rights reserved. Printed in the United States of America. Please contact Xerox Feeding and Finishing with any comments or suggestions regarding the content within this document: xeroxfinishing@usa.xerox.com Copyright protection claimed includes all forms and matters of copyrighted material and information now...
DocuSheeter and Grain Rotator together with: • Xerox DocuPrint 1xx (grain rotator not available) • Xerox DocuTech 1xx HighLight Color (HLC) (grain rotator not available) • Xerox DocuTech 61xx This guide will provide the Analyst and the coordinating Customer with common DocuSheeter and Grain Rotator specifications and specific pre-installation tasks.
Page 6
Lasermax Roll System DocuSheeter with optional Grain Rotator...
Operators readily master the equipment. Easy roll loading, simple thread-up and quick form size changes increase uptime. DocuSheeter runs all the form sizes your printer can handle, and accommodates wide rolls for two-up printing. Process plain or pre-printed forms to produce bills, statements, checks, reports, and other documents in record time.
Page 8
Lasermax Roll System DocuSheeter with optional Grain Rotator Unwinder Optional Grain Rotator (only available with Cutter DocuTech 61xx family) In addition, the DocuSheeter DT can also be equipped with an optional Grain Rotator. This device is only available with the DocuTech 61xx family printers.
Install Planning This Install Planning guide will help you prepare for the installation of the Lasermax Roll Systems DocuSheeter and optional Grain Rotator. Device Configurations The Lasermax Roll Systems DocuSheeter components are: • DocuSheeter DP / DT • Grain Rotator (optional, only available with DT61xx) •...
Page 10
325 pounds (147 kg), measuring 52” x 40” x 50” (1321 x 1016 x 1270 mm). Grain Rotator Sheet Transport The Sheet Transport is installed within the printer and does not affect the solutions footprint. 40” x 29” x 18” 1020 x 740 x 460 mm Skidded for...
Lasermax Roll Systems personnel install the DocuSheeter at the customer site. Estimated installation time is 8 hours, assuming the following: • The Xerox printer to which the DocuSheeter DP will be attached is installed and operational upon the arrival of the Lasermax Roll Systems technician. •...
Sheet Sizes Roll Weight Roll Core Size Limitations • Operator must walk behind the printer to access the various controls on the DocuSheeter. Specifications 16 – 32 lb Bond (60 to 120 gsm) Maximum: 50” (1270 mm) Minimum: 7” (178 mm) Maximum: 18.375”...
System Dependencies and Prerequisites Listed below are the dependencies and prerequisites for installing the DocuSheeter. • Configuration Guide The Configuration Guide contains diagrams over the various Finishing Solutions that are available. Productivity Guide The DocuSheeter DP does not affect the base printers output speed.
3. Xerox DocuTech 1xx HighLight Color (HLC) Performance Specifications Listed below are the Performance Specifications for the DocuSheeter DP. DocuSheeter Roll Basis Weight Roll Diameter Roll Width Sheet Sizes Roll Weight Roll Core Size Limitations • Operator must walk behind the printer to access the various controls on the DocuSheeter.
System Dependencies and Prerequisites Listed below are the dependencies and prerequisites for installing the DocuSheeter. • Configuration Guide The Configuration Guide contains diagrams over the various Finishing Solutions that are available. Productivity Guide The DocuSheeter DP does not affect the base printers output speed.
Sheet Sizes Roll Weight Roll Core Size Limitations • Operator must walk behind the printer to access the various controls on the DocuSheeter. Specifications 16 – 32 lb Bond (60 to 120 gsm) Maximum: 50” (1270 mm) Minimum: 7” (178 mm) Maximum: 18.375”...
System Dependencies and Prerequisites Listed below are the dependencies and prerequisites for installing the DocuSheeter with Grain Rotator. • The DT61xx must be equipped with a interposer. Configuration Guide The Configuration Guide contains diagrams over the various Finishing Solutions that are available. Productivity Guide The DocuSheeter DT does not affect the base printers output speed.
For installations made in the US and Canada, a copy of the signed Customer Agreement must A) Attached to the XOA / Customer purchase order and faxed to SPA: 1-800 –407-8430. B) Scanned and emailed to Phil.Schmelzlen@xerox.com, or faxed to Phil Schmelzlen (585) 427-3140 (8*227-3140).