Vertical Lines Appear Wavy; Oil Streaks On Print - Xerox ii LINXSolid Inkjet 100 Service Manual

Ghosting
Drum is too warm.
Verify the drum temperature using PC-based diagnostics. Ensure the
drum temperature sensor is clean and properly positioned.
Ghost Of First Print On The Next Print
Incomplete image transfer is taking place on the first print.
1. Inspect the drum maintenance system. Does the drum
maintenance roller contain sufficient oil? Replace the drum
maintenance roller (and counter chip), if necessary.
2. Is the drum maintenance cam roller and electric clutch
operating correctly? Test them using PC-based diagnostics.
3. Ensure the left and right drum maintenance actuators operate
correctly when lifted by the cams of the drum maintenance cam
roller.

Vertical Lines Appear Wavy

Straight vertical lines appear to be wavy and ill-formed.
1. Too much oil on the drum. Inspect the drum maintenance
drawer. Is the wiper blade damaged? If necessary, replace the
drum maintenance drawer.
2. Are the drum maintenance cam roller and electric clutch
operating correctly? Test them using PC-based diagnostics.
3. Ensure the left and right drum maintenance actuators operate
correctly when lifted by the cams of the drum maintenance cam
roller.

Oil Streaks On Print

Oil stains the edge of the print.
1. Inspect the drum maintenance drawer. Is the wiper blade
damaged? If necessary, replace the drum maintenance drawer.
2. Are the drum maintenance cam roller and electric clutch
operating correctly? Test them using PC-based diagnostics.
3. Ensure the left and right drum maintenance actuators operate
correctly when lifted by the cams of the drum maintenance cam
roller.
Troubleshooting 3-27