Xerox ii LINXSolid Inkjet 100 Service Manual page 212

6-22 ii LINX™ Solid Inkjet 100 Printer Service Manual
Slot
Compound gear
Upper feed roller electric clutch
Figure 6-14. Remove the Upper Feed Roller Assembly (left side)
6. Front: Open the front door and remove the drum maintenance
drawer. Also, remove the bright, metal duplex paper guide
from the front of the printer. It is held in place with two
screws.
7. Remove the left and right maintenance drawer guides. Each is
held in place by a single screw at the front and two frame
latches at the rear.
NOTE: If you have trouble removing the right maintenance drawer
guide, manually rotate the X-axis drive to move the printhead (in its
forward position) to the center of its travel.
8. Remove the screw securing the right side of the upper feed
roller assembly to the inside of the printer frame.
Disconnect
head tilt
spring
Upper feed
roller shaft
Feed drive
belt
840-4-13