Drum Position Encoder Gap - Xerox ii LINXSolid Inkjet 100 Service Manual

4-22 ii LINX™ Solid Inkjet 100 Service Manual
Belt lock
Index mark
on right
frame
Fan
Idler
pulley
Right
cap/wipe/purge
assembly belt
Figure 4-8. Aligning (Timing) The Cap/Wipe/Purge Assembly
Drive Belts

Drum Position Encoder Gap

This procedure ensures that the drum-position sensor assembly's
encoder wheel rotates freely inside the gap of the drum-position
sensor without the encoder wheel's disk touching the sensor. If the
disk touches the sensor, it can abrade the disk and result in erroneous
drum position readings.
1. Ensure that the retaining spring is not in the drum-position
Unlock
Latch
For new belt,
break off
actuator
on left-side
belt lock
Left belt lock:
align pointer
between
two index
marks
Lock
Leave gap
between latch
and belt
tensioner
0388-32