Power Control Board - Xerox ii LINXSolid Inkjet 100 Service Manual

Power Control Board

6-18 ii LINX™ Solid Inkjet 100 Printer Service Manual
1. Turn off the printer and remove the power cord.
2. Remove the right cover.
3. Remove the left cover.
4. Remove the top cover.
5. Remove the rear cover.
6. Remove the ink loader.
7. Remove the main board.
8. Remove the power supply.
9. Remove the network card or its cover plate, whichever is in
place.
10. Remove the internal hard drive or cover plate whichever is in
place.