Xerox ii LINXSolid Inkjet 100 Service Manual page 94

PostScript®-detected Error Codes
NOTE: Codes from 24,000 through 24,999 are engine failures reported by PostScript. They are NOT
stored in the fault history table in NVRAM. These are reported when the engine has been stuck in a state
for 25 minutes.
Error Code
24,000.17
24,000.18
24,002.10
24,003.11
24,000.12
24,005.13
24,006.14
24,007.15
24,007.16
24,009.17
24,010.18
24,011.10
24,012.11
24,013.12
24,014.13
24,015.14
24,016.15
2-16 ii LINX™ Solid Inkjet 100 Service Manual
Meaning
Engine reports power is off—impossible.
Engine reports it is running diagnostics—impossible.
Engine is stuck in the VxWorks shell.
Engine is stuck in mechanism init.
(unused)
Engine is in state ready but is not permitting commands.
Engine is stuck, in standby.
Engine is stuck, while printing.
Engine is stuck, while cleaning the drum.
Engine is stuck, while purging the head.
Engine is stuck, while wiping the head.
Engine is stuck, while oiling the roller.
(unused)
Engine has a fault but will not say why.
Engine is stuck while powering down.
(unused)
Engine is stuck while oiling the drum.