Xerox ii LINXSolid Inkjet 100 Service Manual page 260

7-12 ii LINX™ Solid Inkjet 100 Printer Service Manual
Launch the Quick Configuration Wizard
Click Quick Configuration to launch the Quick Configuration
Wizard.
Configure the Printer and Set Up Queues
1. If desired, change the Print Server Name or Printer Name.
2. Select connection mode(s) by checking the box(es) for Bindery
Services, NDS Services, or both.
3. Click Next; the dialogs that follow allow you to configure
Bindery connections, NDS connections, or both. You need to
supply the following information for these connections:
Information Needed for Bindery Connections
Select either the configuration file server or the preferred file server
from the drop-down list; click Next.
If the file server you want is not on the list, proceed with these steps:
1. Click File Servers to display the File Servers Browse dialog
box.
2. Select the server you want. Click OK. You are returned to the
File Server Selection dialog box.
3. Select either the configuration file server or the preferred file
server from the drop-down list. Click Next.
Create and select a new queue, or select an existing queue. Click
Finish.
Information Needed for NDS Connections
• Specify the current Directory Services Tree (the tree where
the print server will reside).
• Specify the current Directory Services Context (the location
in the directory services tree where the print server will
reside).
• Create and select a new queue, or select an existing queue.
Click Finish.