Xerox ii LINXSolid Inkjet 100 Service Manual page 32

Table 1-4. Configuration Page Settings (continued)
Parameter Description
Last Config Time Last date the printer's
configurations were altered
SysAdmin contact Name of system administrator
Printer Location Physical location of printer
as set by system administrator
PhaserSh are Indicates the type of Phaser
Share network card installed
Network Address A unique number for each
Ethernet-capable printer.
EtherTalk Indicates the type of interpreter
in use at the port.
Language
Filtering Interpretation of special
characters
Job Pipelining Indicates if multiple printfile
processing is allowed
Name The current name of the printer
as seen on a network
Printer type Indicates the type of printer
installed at the port.
Zone Name assigned by network
administrator for the zone the
printer is assigned to.
Network Node
1-32 ii LINX™ Solid Inkjet 100 Service Manual
Saved in D e f a u l t
NVRAM
yes
yes
yes
no Built-in
yes Hardware-
dependent.
Legal values
have the
form
xx:xx:xx:xx:
xx: xx
yes PostScript
Level 2
PostScript
yes None
yes Off
yes Ii LINX SIJ
100
LaserWriter Any string, 32 character or less
yes
Limits or alternate choices
Empty string
Empty string
Ethernet
Not installed, Disabled,
<interpreter> enabled
On
Any name defined by the customer
up to 32 characters in length.
Any string, 32 characters or less