Xerox ii LINXSolid Inkjet 100 Service Manual page 142

3-42 ii LINX™ Solid Inkjet 100 Service Manual
Saving And Restoring Test Selections
The current test selection may be saved to a file and later restored,
including the completion status of tests which were run earlier. The
result of loading a saved test selection file is exactly the same as if the
settings were re-specified manually. It provides a way to pre-select
tests for particular audiences.
Tests are executed in the order they appear in the menu, not in the
order they are selected.
The default file name extensions for saved test selections is .TSV.
The diags.ini file keeps the settings for the port number, baud rate,
whether the debug messages are on or off, and the saved file name.
Definitions:
port: 0 comm port 1
port: 1 comm port 2
baud: 0 9,600 bps
baud: 1 19,200 bps
baud: 2 38,400 bps
baud: 3 57,600 bps
debug: 0 Debug Messages off
debug: 1 Debug Messages on
save: {blank}
save: {filename.extension}
Saving And Restoring Other Settings
Any user-configurable setting that the program recognizes is saved in
a configuration file called DIAGS.INI and persists from session to
session. Presently there is a short list of configurable items, but any
program setting you make need only be done once.
Diagnostic Pull-down Menus Summary
All of the functionality in the user interface is accessible from the
menu bar. Some of the functions are additionally available via
"accelerator" key (Alt- key) synonyms. The following discusses the
pull-down menu left to right.
Tests Command (Alt-T)
Opens the "Tests" selection window.
no file available
name of file