Using Your Printer With A Macintosh; Installing Software For Macintosh - Xerox WorkCentre 3119 User Manual

7
Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the CUPS driver
by installing the PPD file.
N : Some printers do not support a network
OTE
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User's Guide.
This chapter includes:

• Installing Software for Macintosh

• Setting Up the Printer
• Printing
• Scanning
Installing Software for
Macintosh
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver (only available when you use a printer
which supports the PostScript
Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
Verify the following before you install the printer software:
Item
Operating System
RAM
Free Disk Space
driver), for printing on a
Requirements
Mac OS 10.3.x or higher
128 MB
200 MB

Using Your Printer with a Macintosh

Install the Printer driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Printer folder.
6
Double-click the Xerox MFP Installer_OS X icon.
7
Enter the password and click OK.
8
The Xerox SPL Installer window opens. Click Continue and
then click Continue.
9
Select Easy Install and click Install.
10
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Printer folder.
5
Double-click the Xerox MFP Installer_OS X icon.
6
Enter the password and click OK.
7
The Xerox SPL Installer window opens. Click Continue and
then click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.
27