Xerox ii LINXSolid Inkjet 100 Service Manual page 89

9,000: Ink Loader: Ink Melters and Printhead Ink Level Sensors Error Codes
Front Panel Software Error Code
Display
IL_FAULT_LOW_JAM
9,005.40
il fault: low density ink-stick jam
(0x4c05)
IL_FAULT_INTER_JAM
9,006.41
il fault: intermediate density ink stick jam
(0x4c06)
IL_FAULT_CLEAR_JAM
9,007.42
il fault: clear ink stick jam
(0x4c07)
IL_FAULT_HIGH_JAM
9,008.43
il fault: high density ink stick jam
(0x4c08)
13,000: Head Thermals Error Codes
Front Panel Software Error Code
Display
TCH_JS_LEFT_OPEN
13,001.40
tch fault: left jetstack open
(0x6c01)
TCH_JS_LEFT_SHORT
13,002.41
tech fault: left jetstack shorted
(0x6c02)
TCH_JS_LEFT_HOT
13,003.42
tch fault: left jetstack run-away
(0x6c03)
TCH_JS_LEFT_SLOW
13,004.54
tch fault: left jetstack not heating
(0x6d04)
TCH_JS_RIGHT_OPEN
13,017.46
tch fault: right jetstack open
(0x6c11)
TCH_JS_RIGHT_SHORT
13,018.48
tch fault: right jetstack shorted
(0x6c12)
TCH_JS_RIGHT_HOT
13,019.40
tch fault: right jetstack run-away
(0x6c13)
Error Codes
Error Codes
Meaning
The low density ink melt heater is on, but Ink 12
does not seem to be dripping. Check that the
stick of Ink 12 is able to advance in the chute.
The intermediate density ink melt heater is on,
but Ink 13 does not seem to be dripping. Check
that the stick of Ink 13 is able to advance in the
chute.
The clear ink melt heater is on, but Ink 11 does
not seem to be dripping. Check that the stick of
Ink 11 is able to advance in the chute.
The high density ink melt heater is on, but Ink 14
does not seem to be dripping. Check that the
stick of Ink 14 is able to advance in the chute.
Meaning
The thermistor in the left jetstack appears to be
open.
The thermistor in the left jetstack appears to be
shorted.
The left jetstack heater is running away. Unplug
the printer NOW!
The left jetstack heater is not heating at all, or is
not heating as quickly as it should.
The thermistor in the right jetstack appears to be
open.
The thermistor in the right jetstack appears to be
shorted.
The right jetstack heater is running away. Unplug
the printer NOW!
Error Codes and Messages 2-11