Xerox ii LINXSolid Inkjet 100 Service Manual page 11

Ink load
cover sensor
Ink-stick-
low sensor
Top cover
switch
Front cover
switch
Preheater
entry/right
edge sensor
Hand-feed
sensor
Paper-pick
sensor
Figure 1-7. Sensors and Switches on the Right Side of the Print Engine
Sensors in the printer provide information to the main board to
determine the state of the printer. The printer monitors the positions
of some of the movable assemblies, such as the drum, as well as the
temperature of many other assemblies, such as the printhead, paper
preheater and the drum. Figure 1-7 shows the sensors and switches
on the right side of the print engine. Figure 1-8 illustrates the sensors
and switches on the left side of the printer.
Ink-stick-
out sensor
Cap/Wipe/Purge
home sensor
Paper-empty
Tray type
sensor
sensors
Exit/tray-full
sensor
A4-size media
sensor
A-size media
sensor
Maintenance
blade position
sensor
0388-07
General Information 1-11