Setting Interpolation Defaults - Xerox ii LINXSolid Inkjet 100 Service Manual

Paper LUT
The menu item Paper LUT Customization is found under the menu
Service Support. The Paper LUT Customization setting is a number
ranging from 0.5 to 1.0. It affects how built-in look-up tables appear
on paper. (User-defined LUT families and the Linear LUT are not
affected.) Lower values whiten images, while higher values darken
images.
NOTE: The default setting is 0.8. Adjusting this value is not
recommended.

Setting Interpolation Defaults

This option lets you change the default image interpolation mode.
Since image resolution is usually 150 to 300 dpi, and the printer
produces images at 600 dpi, most images are automatically expanded
or scaled when printed. Use this option to specify the way your
images are smoothed or blended when they are scaled.
Bilinear
This selection blends adjacent pixels in an image in a manner that is
linear in both the horizontal and vertical axes of the image. Bilinear
is the most common, and the fastest, image smoothing method.
Cubic
These selections are slower methods of image smoothing that produce
sharper image detail. The values represent degrees of sharpness, with
the smaller values producing the sharpest image detail.
Replication
This selection uses a technique that expands with each pixel. Use
Replication for an accurate representation of image data, with no
smoothing modifications.
4-28 ii LINX™ Solid Inkjet 100 Service Manual