Exit Roller Drive Belt Tension Adjustment - Xerox ii LINXSolid Inkjet 100 Service Manual

Exit Roller Drive Belt Tension Adjustment

1. Turn off the printer and remove the left-side cabinet panel.
2. To adjust the belt tension, loosen the exit roller drive belt
tensioner. With a spring scale, press downward on the idler
tensioner of the exit roller drive belt with a pressure of 0.34 kg,
±14 g (12 oz., ±0.5 oz.) then tighten the tensioner in place. Do
not over-tension the belt.
Press here to
set belt
deflection
Figure 4-3. Setting Exit Roller Drive Belt Tension
3. Reinstall the left side panel.
Exit roller drive
belt tensioner
0388-29
Adjustments 4-9