Removing The Covers - Xerox ii LINXSolid Inkjet 100 Service Manual

Removing the Covers

6-4 ii LINX™ Solid Inkjet 100 Printer Service Manual
Removing the Right and Left Covers
1. Open the front door.
2. Remove the two screws securing the left (or right) cover in
place. A sheet-metal screw secures the cover inside the front
door. A machine screw secures the cover at the rear cover.
3. Remove the left (or right) cover.
NOTE: For reassembly, note how the cover interlocks with the bottom
of the printer frame. Pushing in on the bottom-center of the cover
helps to lock it in place.
Reverse these steps to install the right or left cover.
Screw
Figure 6-1. Removing Right Cover
Screw
Right
cover
840-4-02