Upper Feed Roller Assembly - Xerox ii LINXSolid Inkjet 100 Service Manual

Upper Feed Roller Assembly

5. At the front of the paper/drum heater remove the two screws
securing the heater to the inside of the printer frame. Do not
confuse the mounting screws with the nearby smaller, brass-
colored assembly screws.
Reverse these steps to install the paper/drum heater.
1. Remove the right cover.
2. Remove the left cover.
3. Disconnect the head tilt spring.
4. Left side: Remove the upper feed roller electric clutch from
the end of the upper feed roller shaft by moving the locking tab
on the clutch away from the shaft.
5. Remove the feed roller drive belt and compound gear from the
left end of the upper feed roller. Note the small slot in the
compound gear to ease removal.
Removal and Replacement 6-21